Call Today

 

 

We've stumbled on this great article involving How to Troubleshoot and Repair an Electric Water Heater listed below on the net and reckoned it made perfect sense to relate it with you over here.

Lots of contemporary homes utilize an electric water heater for their heating system, due to its convenience and also convenience of use. Nonetheless, much like any other electrical appliances, problems might develop with its usage, unexpectedly. It can be actually discouraging to wake up to a cool shower as opposed to a warm one or having your bath with water that isn't hot adequate and even as well hot. Whatever the instance might be, water heater problems can be fairly stressful. Thankfully, we've made a checklist of feasible services to your water heater concerns. There are a number of factors that can trigger a number of these troubles, maybe an issue with the power supply, the electric burner, or the thermostat. Before doing anything, guarantee you shut off the main power supply for safety and security. Whatever the issue is, getting it fixed must not position too much of a problem if you follow these actions:

 

Inspect Your Power Supply:

As standard as this might seem, it is really required. Without ample power, your hot water heater will not work. So the first thing to do when your water all of a sudden retires is to verify that it isn't a power trouble. Inspect if the fuse is burnt out or the circuit breaker stumbled. If the circuit breaker is the concern, just transform it off and on once more. Replace any damaged or damaged fuse. Evaluate the device with power after these modifications to see if it's currently working.

 

Examine the Heating Element in the Hot Water Heater:

If it's not a power problem, then attempt having a look at your burner if it is still working. Examine each of your heating elements to make sure the problem isn't with any of them. If any one of them is defective, replace that component and afterwards examine whether the hot water is back on.

 

Check Your Thermostat:

If your water heater still isn't working or the water appearing isn't warm sufficient, you might require to check the temperature settings on your upper thermostat. Guarantee the circuit breaker is switched off prior to doing anything. Open up the accessibility panel and also press the red switch for temperature level reset over the thermostat. This should help heat the water. Turn the breaker back on and check if the issue has actually been solved.

 

Call A Specialist:

If after changing all faulty parts and resetting your temperature, the water heater still isn't working, you may require to speak to a specialist plumber for a professional opinion. The problem with your heating unit could be that the hot and cold taps have actually been changed or it might be undersized for the quantity of warm water required in your house. Whatever the instance might be, a specialist plumber would certainly aid solve the problem.

 

Conclusion

Water heater problems are not always major. A lot of them are due to minor issues like a blown fuse or worn-out heating element. Replacing the faulty parts should suffice. Nonetheless, if you are still incapable to address the trouble, give a call to your local plumber ahead to get it taken care of.

 

8 possible reasons why you have no Hot Water

 

Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.

 

Water Leak

 

Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.

Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.

 

Gas Heater: Gas Leak

 

If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.

 

Gas Heater: Pilot Light Problems

 

There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.

Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.

 

Gas Heater: Faulty Thermocouple

 

The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.

 

Electric Heater: Breaker Blues

 

Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.

 

Electric Heater: Reaching The Limit

 

If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.

 

Electric Heater: Heating Element

 

If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/

 

Hopefully you enjoyed our article about Hot Water Heater Repair. Thanks so much for spending some time to read through our short article. Are you aware of somebody who is fascinated with What Would Cause My Electric Water Heater to Stop Working?? Be sure share it. Thanks a lot for taking the time to read it.

Go Deal Now